Fire precautions in the design, construction and use of buildings - Code of practice for residential buildingsFire precautions in the design, construction and use of buildings Part 1: Code of practice for residential buildings Executive summary Recommendations for fire precautions in the design, construction and use of residential buildings. Abstract This part of BS 5588 provides recommendations and guidance for designers and building construction teams in their task of incorporating into the following buildings measures that should, in the event of fire,

it is essential that the severity and duration of an internal or external fault be limited to values that can be sustained by the electrical apparatus without damage

suppress and control a fire at an early stage of development

It examines security issues that may impact on the trustworthiness of sensors and their use

a 12-threads per inch series (12 UN) from 5/8 in to 6 in nominal diameter

DD CEN/TS 15945 is a Technical Specification which specifies the following for all adult consumers:

Inspection

Annex A (normative) Water absorption test

for use in aircraft systems at a nominal operating pressure of 35 000 kPa (5 080 psi) maximum and temperature range of −54 to +135 °C (−65 to +275 °F)

BS EN 1640 should be used in conjunction with the standard applicable to dental instruments

§  The data to be maintained in a gazetteer of streets

This international standard specifies the definitions of the geometric measurements and fracture types to be used in relation to the testing of resistance spot

Lead wire method