LP715-37 | LP715 Near-IR Longpass FilterThe MidOpt LP715 37 is used with a monochrome camera to improve infrared contrast and resolution. LP715 filters block all visible light while passing Near IR wavelengths. To block deeper infrared light, we recommend our BP800 Bandpass filter as an effective choice when the filter material is 1mm thick or less. All MidOpt filters can also be purchased unmounted and in custom dimensions upon request from Machine Vision Direct. Technical Specifications

LP830 Near-IR Longpass

Opto Engineering TCCX250-W

Brand Advanced Illumination Series BL193 Wavelength 520 Color Green Driver I3S Ingress Protection IP50 Length 10 in Weight 408g Can Be Strobed Yes Can Be Overdrive Strobed Yes Can Be Constantly On Yes Can Be Dimmed Dimmable Connection 2M Flying Lead Full Description

BL31318-59024 Specifications:

6 × 59 mm AOV @ 1/2

Advanced Illumination DL15104-590I3S Downloads:

Line Scan IP Rating Not Specified Focal Length 50 mm ƒ/N ƒ/2

They produce high contrast and resolution in both the center and corners

8P Female A Coded connector to 30 meter 28 AWG

2 mm Resolution (Pixel Size) 18 μm Mount F-Mount Dimensions Approximate 359

RL-S052120M-940 Specifications:

Electrical Characteristics + Voltage 24 VDC V Max Input Power Constant On 17 W Max Strobe Latency 10 us Max Strobe Duration No Limit Max Strobe Frequency 4000 Hz Max Strobe Duty Cycle 100 % Min Strobe Duration 1 ms Max Duty Cycle 100 % PNP Trigger Voltage 4-24 VDC V PNP Trigger Current 17