Plastics hose. General-purpose collapsible water hose, textile-reinforced. Specification1 Scope This International Standard specifies the requirements for four types of textile reinforced thermoplastics collapsible water hoses for general applications for use in the temperature range of 10 C to 55 C. Such hoses are classified into four types, as follows: low pressure, designed for a maximum working pressure of up to 0,4 MPa (4,0 bar) at 23 C and up to 0,2 MPa (2,0 bar) at 55 C; medium pressure, for a maximum working pressure of up to 0,7

BS EN 61290-1-2 applies to optical amplifiers using optically pumped fibres (OFAs based on either rare-earth-doped fibres or on the Raman effect)

reflect the latest technical knowledge of methods of determining the acoustical properties from the specific family of building products or equipment under consideration

In addressing end-of-life requirements

as listed in Clause 4

What is BS EN 10225-4 - Weldable structural steels about

hazardous event investigation

of round steel bars

This International Standard describes three methods of assessing the resistance of coated fabrics to damage by repeated flexing

amplifier or regenerator shown

and product design

which would not be completely acetylated

via internet) or offline (e