KLM67048/LM67010 - FAG Taper Roller Bearings - 31.75x59.131x16.764mmThis KLM67048 LM67010 bearing is an imperial taper roller bearing. The bearing's dimensions are 1. 25x2. 328x0. 66inch Cone Reference Cup Reference KLM 67048 LM 67010 K Series, Light Medium Cone Reference Standard Bearing Light Medium Cup Reference Standard Bearing

This N1024KTN9/SP bearing is a single row super precision cylindrical roller bearing with a triple ribbed inner ring

This SALA50TXE-2LS bearing is a Left Hand Rod End with Male Thread

with a cylindrical extension on both sides of the inner ring 30mm - Bore Size SKF Explorer bearing

Very Thin Section 17mm - Bore Size Rubber Seal on Both Sides of Bearing Internal Clearance Greater than Normal

Product Data Sheet

it allows the adjustment of screws including set screws and countersunk head screws

The bearing has a width of 40mm and a length of 60mm

NU 3 26 EMA C4 Single row cylindrical roller with no flanges on inner ring Medium Series 130mm - Bore Size Extra capacity and a single-piece machined brass cage Radial internal clearance greater than C3

618 07 2RS Extra Ultra Light Thin Series 35mm - Bore Size Rubber Seals on Both Sides of the Bearings Normal Radial Internal Clearance

The bearing's dimensions are 10x22x6

72 10 B M Metric

This 7926CTRSULP3 bearing is a Super Precision angular contact bearing with a 15° contact angle and a phenolic cage