1/4" x 6' Open and Open Spelter Socket Wire Rope SlingSpelter sockets can be found on guylines, raising lines, lifting bridles, and other wire ropes. These sockets are fixed to wire ropes for static applications, as well as lifting applications. This 1 4" by 6' Type 110 Spelter Socket sling has a working load limit of 0. 68 tons. The length of the assembly is measured from the center point of the pin with an open socket like this one. This wire rope socket sling has an open spelter socket on each end.

equipped with a clevis grab hook on each end

which can also increase the efficiency of the sling by at least 15% over standard chain and anchor bows and traditional eye hooks

This swage socket sling consists of a 1" by 16' wire rope fitted with open swage sockets at each end

The 1/4" by 4' long wire rope sling has swage sockets fitted to each end

use a long shank padlock (not included) to lock to the tie down

This sling measures 10' length bearing point to bearing point and features self-locking hook and foundry hook end fittings

The smartest solution to excess ratchet strap webbing is here

This Type 110 Spelter Socket has a 1-3/8" by 6' wire rope assembly with a closed spelter socket on each end

Twisted snap hooks and a double D-ring make this two-leg tie down strap ideal for quickly securing corners on party tents and other special event tents

This model can be used to create a 2-leg sling chain assembly using 3/8" chain or 3 or 4 leg slings with 9/32” chain

or knot your ratchet strap tails

This Type 110 Spelter Socket sling has a working load limit of 19