StyreneStyrene is the recommended thinner when using polyester and vinyl ester resins and gel coats. All polyester and vinyl ester resins contain styrene monomer. Thinning resins and gel coats isn't usually necessary, but can be performed for applications where a lower viscosity is desired (spraying or infusing). Styrene resin thinner is a must if you are planning to spray gelcoat using air equipment. It is recommended when adding styrene, that no more than

Reduced orange peel---the low viscosity of the blend results in a smooth finish that is easily sanded

This product is sold by the Kilogram in a drum

Achieve exceptional structural integrity with our Cotton Fiber Filler

Wear the following PPE safety equipment

The unit price displayed is for 1 linear yard

by about 12% of its dry volume

a unidirectional layer going the length of the fabric (0 degrees)

the mixing process is similar to that of dry micro

3M™ Filter 7093

From waterproofing and fiberglassing to gluing and filling

flexibility

Easy to apply and use