1.25 MM 3 PIN JST Male & Female Wire ConnectorA male connector is commonly referred to as a plug and has a solid pin for a center conductor. On the other hand, a female connector is commonly referred to as a jack and has a center conductor with a hole in it to accept the male pin. The terms male and female always refer to the threads on the fitting. The male threads are on the outside like a bolt and the female threads (female fittings) are on the inside like a nut. Male threads screw into female

These push-pull switches are specially designed in a slightly larger and longer size and length

These are Metal Film Resistor with a value of 10 ohm 1/4W and tolerance of ±1%

GND Size 35x29x14mm

It is packaged in a DO-15 container

5k ohm 1/4W and tolerance of ±1%

2M ohm (225) Brand Resistor Chip size 0805 Tolerance 5% Power 1/8W Temperature Range -55°C to +125°C Mounting Type Surface mount No

Provides a simple and secure DIY solution for DC power connectivity

also known as a micro pumping pump

>20kHz in resonant mode)

Center Contact Resistance ‚¬°¤6

When these trimpots are turned in a clockwise direction

Over Line and Load Conditions